www.Loadcells4u.com

Your online source for weighing

COMPONENTS

Floor & Tank scale kits

Single point load cells

	General Sensor - model GS-FLS is interchangeable with Weigh-Tronix FLS single point load cell. This load cell goes into the Diamond bench scales from Weightronix. 1 mv/v, 0.02% nonlinearity, 350/350 ohms, 10ft 4 cond cable Stainless Steel, IP67.

	General Sensor 1250 Interchangeable with Tedea 1250. 2 mv/v, 0.02% total error, 410/350 ohms, 10 ft 4 cond cable, anodized aluminum

	CAS Model BCM Interchangeable with Tedea 1250 2mV/V, 0.02% combined error, 400/350 ohms, 10 ft 4 cond cable, anodized aluminum, NTEP 97-008

	Tedea 1250 These cells have a unique humidity resistant protective coating assures long term stability even under harsh environment and extreme temperatures. 2mv/v, 0.02% total error, 415/350 ohms, 10 ft 6 cond. cable, anodized aluminum. NTEP 89-054A III S 5,000 div.

	Revere Transducer 652 Interchangeable with Tedea 1250. The load cell has been discontinued!

	Sensortronics Model 60060 Aluminum Interchangeable with Tedea Model 1250 2 mv/v, 0.02% total error, 350/350 ohms, 10 ft 4 cable, anodized aluminum

	Sensortronics Model 60060 Stainless Steel the load cell has been discontinued! Interchangeable with Tedea Model 1250 (dimensions/capacities) 2 mv/v, 0.02% total error, 350/350 ohms, 10 ft 4 cable, stainless steel.

	HBM PW12 Replacement for Tedea 1250. 2mv/v, 0.02% total error, 420/350 ohms, 9 ft 6 cond cable, anodized aluminum, IP67. NTEP 99-106 III S 5,000 div

	HBM PW16 interchangeable with Tedea model 1260. 2mv/v, 0.02%total error, 415/350 ohms, 3m 6 cond cable, anodized aluminum, IP67

	Tedea 1260 These cells slightly smaller than the 1250. Protective coating assures long term stability in high moister enviroment. 2mv/v, 0.02% total error, 415/350 ohms, 3m 6 cond. cable, anodized aluminum. NTEP 96-064A III S 5,000 div.

	Revere HPS load cell hermetic platform sensor. LB unit has (2)mtg holes on top and (2) mtg holes on the bottom. 1/4-20 thread with 3/4" spacing. Kg unit has (4) holes thru mtg holes 0.254" dia. The kg unit is 2 mv/v and the lb unit is 3 mv/v. 2&3 mv/v 0.03% nonlinearity. 390/350 ohms, 10ft 4 cond. cable, Stainless Steel construction.

	Totalcomp Model TP462 Interchangeable with Revere 462 2mV/V, 0.03% nonlinearity, 350/350 ohms, 10 ft 4 cond cable, nickel plated steel

	Revere Transducer Inc. Model 462 The model 462 is a cantilevered steel beam designed for platform and process weighing. Its negligible off center loading error, high impact load resistance, virtual zero fatigue factor and effective waterproofing provide superior performance in all applications. 2mV/V, 0.03% nonlinearity, 350/350 ohms, 10 feet 4 cond cable, nickel plated steel.

	Tedea-Huntleigh Model 1010 Replacement for Electroscale 438, 920, 925, General 4535, MLC SS, NCI 3250, 8205, 5800, 3800. Mounting screws are 1/4-20 UNC (coarse) with 3/4" spacing on both top and bottom. These cells have a unique humidity resistant protective coating assures long term stability even harsh environment and extreme temperatures. 2mv/v, 0.02% total error, 415 / 350 ohms, 1 m 6 cond. cable, anodized aluminum. NTEP 89-074 S III 5000 divisions.

	Scaime Model AG Interchangeable with Tedea 1040. Mounting screws are 1/4-20UNC (coarse) with 3/4" spacing on both top and bottom. 2mv/v, 0.02% total error, 415/350 ohms, 3m 4 cond. cable, anodized aluminum. NTEP 91-051 S III 5000 divisions 5 kg - 100 kg

	Tedea 1042 Replacement for Tedea Model 1040 interchanges with Revere 642, TP40, AG. Mounting screws are 1/4-20UNC (coarse) with 3/4" spacing on both top and bottom. These cells have a unique humidity resistant protective coating assures long term stability even under harsh environment and extreme temperatures. 2 mv/v, 0.02% total error, 9 ft 6 cond cable, 415/350 ohm, anodized aluminum. NTEP 96-132

	Totalcomp Model TP40 and TP40-SS TP40 is a Replacement for Tedea Model 1040, HBM SP4, and the TP40-SS is a replacement for Tedea Model 1140, HBM SS4. Mounting screws are 1/4-20UNC (coarse) with 3/4" spacing on both top and bottom. 2 mV/V, 0.03% total error, 350/350 ohm, 10 ft 6 cond cable anodized aluminum.

	Tedea-Huntleigh Model 1040 Anodized Aluminum These cells have a unique humidity resistant protective coating assures long term stability even under harsh environment and extreme temperatures. Mounting screws are 1/4-20 UNC (coarse) with 3/4" spacing on both top and bottom. 2 mv/v, 0.02% total error, 9 ft 6 cond. cable.

	Tedea-Huntleigh Model 1140 Stainless Steel These cells have a unique humidity resistant protective coating assures long term stability even under harsh environment and extrem temperatures. Mounting screws are 1/4-20 UNC (coarse) with 3/4" spacing on both top and bottom. 2 mv/v, 0.02% total error, 9 ft 6 cond. cable.

	General Sensor Model GSP-MK1 Interchangeable with NCI Model MK 1 load cells. Loading side has (2) 1/4-28 mtg holes with 2-3/4" spacing. Bottom has (2) 1/4-28 mtg holes with 4" spacing. Cable side has (2) 1/4-28 mtg holes with 3-3/4" spacing. Overall 5.9" wide x 5.3" high. 2mv/v, 0.03% nonlinearity, 350/350 ohms, 10 ft 4 cond cable, nickel plated steel.

	Totalcomp Model TP-MK4D Interchangeable with NCI Model MK4 load cells. Top has (2) 1/4-20 mtg holes with 3/4" spacing. Bottom has (3)1/4-20 mtg holes with 3/4" & 2" spacing. Overload stops for both compression and tension loads. 2 mv/v, 0.03% nonlinearity, 350/350 ohms, 10 ft 4 cond. cable, nickel plated steel.

	Totalcomp Model TP-MK4D-SS Interchangeable with NCI Model MK4 load cells. Top has (2) 1/4-20 mtg holes with 3/4" spacing. Bottom has (3)1/4-20 mtg holes with 3/4" & 2" spacing. Overload stops for both compression and tension loads. 2 mv/v, 0.03% nonlinearity, 350/350 ohms, 10 ft 4 cond. cable, stainless steel.

	Sensortonics Model 60048-0108 The 60048-0108 are cell potted wit a special elastic sealant for use in high moisture scales. 2 mv/v, 0.03% nonlinearity, 350/350 ohms, 10 ft 4 conduit cable, stainless steel.

	Sensortronics Model 60051 Replacement for Tedea Huntleigh 1010 and NCI Mark III. Mounting screws are 1/4-28 UNF (fine) with 3/4" spacing on both top and bottom. 2mv/v, 0.02% nonlinearity, 350/350 ohms, 10 ft 4 cond. cable, stainless steel.

	Tedea-Huntleigh Model 1030 1/4-20 UNC mounting holes 2 mv/v, 0.02% total error, 415 / 350 ohms, 1 mt 6 cond. cable, anodized aluminum

	Tedea-Huntleigh Model 240 Single point fluid damped load cell. For check weighing and other high weighing applications where washdown protection is required. Mounting base is 8.7" x 3.2" with (4) .35" dia thru holes. Height is 4.5" with (2) 1/4-20 mtg holes. 2mv/v, 0.015% nonlinearity, 415/350 ohms, 3 m 6 cond. cable, zinc passivated base, painted steel case, aluminum upper load bearing. NTEP 92-181 SIII 5,000 div.

	Tedea-Huntleigh Model 240-SS Single point fluid damped load cell. For check weighing and other high weighing applications where washdown protection is required. Mounting base is 8.7" x 3.2" with (4) .35" dia thru holes. Height is 4.5" with (2) 1/4-20 mtg holes. 2mv/v, 0.015% nonlinearity, 415/350 ohms, 3 m 6 cond. cable, stainless steel base, case, and load bearing. NTEP 92-181 SIII 5,000 div.

	Sensortronics Model 60008 Replacement for Electroscale 905, 910 Discontinued no replacement available 2 mv/v, 0.03% nonlinearity, 350/350 ohms, 10 ft 4 cond cable. Stainless Steel

	Tedea 1320 High Capacity Off-Center Load Cell Model 1320 is a high performance, single point load cell. Insensitive to off-center loads or moments, it is ideal for large platforms or as a side cell for small tanks and silos.

	Tedea 1022 single point Load Cell Model 1022 Tedea Huntleigh load cell will interchange with Scaime EP, General sensor GC2G1. This load cell is used in many scales Doran 4300, PC200. the load cell has M6 thread for mounting on all capacities. 2 mv/v +/-10%, 0.02% total error, 415/350 ohms, 10 ft 6 cond. cable, made out of anodized aluminum. NTEP 96-122 S III 5,000 div.

	Cardinal - Model SP-L and SP-LM Model SP-L is used in most of the Cardinal Counter Scales. The Model SP-LM is used in Bench and Floor Scales also The SP-LM has metric thead M16x2.0x30mm.

FAQ Return Warranty