|
| |
Tanks, Hoppers,
Trucks - Load cells and assemblies
 |
Sensortronics 65016-SS Tank Assembly.
3 mv/v, 0.05% nonlinearity, 700 ohms, 25ft 4 cond. cable. Load cell is
stainless steel. Mount is stainless steel.
Capacities: 1K, 1.5K, 2K, 2,5K, 3K, 5K, 10K, 15K, 20K, 25K, 35K, 50K, 75K,
100K, 200K, 300K lbs |
|
|
Sensortronics 65016 Tank Assembly.
3 mv/v, 0.05% nonlinearity, 700 ohms, 25ft 4 cond. cable. Load cell is
nickel plated steel. Mount is cast ductile iron with yellow zinc
finish.
Capacities: 1K, 1.5K, 2K, 2,5K, 3K, 5K, 10K, 15K, 20K, 25K, 35K, 50K, 75K,
100K, 200K, 300K lbs |
|
|
|
Sensortronics 65069 Tank
Weighing Assembly.
This tank mount assembly uses a 65058 beam
load cell. 3mV/V, 0.05% nonlinearity, 700/700 ohms, 25 ft 4 cond cable,
nickel plated steel load cell and ductile iron mount.
Capacities: 20K, 25K, 40K, 50K, 60K, 75K, 100K, 125K,
200K lbs. |
|
|
|
Ball & Socket Beam Mounting
Assembly (without load cell). Ball and Socket Mounting assembly for
single ended beams, TSB-SS, NSB-SS, 65023-SS, 9123. The load from the hopper
or tank will be aligned with a ball and socket to the top of the load cell
at the load hole. Stainless Steel construction.
Capacities: 250 to 10,000 lbs |
|
 |
Sensortronics 65059 Tank weighing Assembly
This tank
mount eliminates check rods, provides shock absorption for high impact
loads.available in zinc plated steel or stainless steel. |
|
 |
TCM Tank Canister
Mount Assembly
This tank mount assembly uses a hermetically sealed canister load cell with
two attached mounting plates. The lower plate is rigidly mounted to the load
cell and the top plate allows horizontal expansion but does not allow the
top plate to separate from the load cell.
Capacities: 1K, 2K, 5K, 10K, 20K, 25K, 50K, 75K, 100K, 150K, 200K lbs. |
|
 |
Model TDE16 With
Tank Mount Assembly.
Interchangeable with Sensortronics Model 65016. 3m/v, 0.03% nonlinearity,
700/700 ohm, 30 ft 4 cond cable, nickel plated steel load cell.
Capacities: 1K, 1.5K, 2K, 2.5K, 3K, 5K, 10K, 15K, 20K, 25K, 35K, 50K,
75K, 100K, 125K |
|
|
|
Model TDE16-SS
With Tank Mount Assembly.
Interchangeable with Sensortronics Model 65016-SS. 3m/v, 0.03%
nonlinearity, 700/700 ohm, 30 ft 4 cond cable, stainless steel load cell.
Capacities: 1K, 1.5K, 2K, 2.5K, 3K, 5K, 10K, 15K, 20K, 25K, 35K, 50K,
75K, 100K, 125K, 200K |
|
 |
RTM Tank Weighing
Module
All stainless steel construction, this tank mount assembly uses a
hermetically sealed beam load cell with a blind load hole that has a flat
loading surface. Expansion and contraction due to thermal changes and side
load from external forces are handled with rocker pin mounting. After the
side load has been removed the mount will re-center itself using the rocker
pin. This mount is unequalled for repeatability.
Capacities: 500, 1250, 2500, 4000, 5000, 10000 lbs. |
|
 |
TDE17-SS Tank
load cell. Interchangeable with 65016-SS & TDE16-SS |
|
|
|
Revere Transducer Inc. Model
5223
3 mV/V, 0.03% nonlinearity, 700 / 700 ohm, 40 ft 4 cond cable,
hermetically sealed, nickel plated steel. Capacities:
50K, 65K, 100K, 125K, 200K |
|
 |
Sensortronics Model 65058
3 mv/v, 0.05% nonlinearity, 700 ohms, 35 ft 4 cond cable, nickel plated
steel. NTEP 20K thru 125K NTEP 86-046 M IIIL 10,000 divisions.
Capacities: 10K, 15K, 20K, 25K, 30K, 40K, 50K, 60K,
75K, 100K, 125K, 200K lbs |
|
|
|
Sensortronics Model 65040
Replacement for CMI Truck Scale Load Cells
3 mv/v, 0.05% nonlinearity, 700/700 ohms, 35 ft 4 cond cable, nickel plated
steel. Capacities: 25K,
40K, 50K, 60K, 75K, 100K, 125K, 200K |
|
 |
TDE23
NTEP 98-032 M IIIL 10,000 div
Interchangeable with RTI 5223
3 mv/v, 0.03% nonlinearity, 700 / 700 ohm, 35 ft 4 cond cable, stainless
steel w / welded covers. Capacities: 50K, 60K, 57K,
100K lbs. |
|
 |
TDE40
Replacement for CMI Truck load cells.
3 mv/v, 0.03% nonlinearity, 700/700 ohms, 35 ft 4 cond cable, nickel plated
steel
NTEP 98-032 M IIIL 10,000 div. |
|
 |
Sensortronics
Model 65058 TSA Truck Scale Corner Assembly
3 mv/v, 0.05% nonlinearity, 700 ohms, 35 ft 4 cond cable, nickel plated
steel. NTEP 20K thru 125K NTEP 86-046 M IIIL 10,000 divisions. Capacities:
10K, 15K, 20K, 25K, 30K, 40K, 50K, 60K, 75K, 100K, 125K, 200K lbs |
|
 |
Epelsa- Model LC32 STR tuck beam only
3 mv/v, 0.05% nonlinearity, 700/700 ohm, 50ft cable, nickel plated steel
including load button. NTEP 92-030 M IIIL 10,000 div. |
|
|
www.Loadcells4u.com
