www.Loadcells4u.com

  Your online source for weighing

 

COMPONENTS

  Canisters

  "S" type

  Beam type

  Tanks,Hoppers,Trucks

  Single point cells

  Base

  Floor & Tank scale kits

  J-box

  Cable

  Mounting

  Test

  Indicators

  Remote displays

  Printers

  Digital Scales

 

Buy Beam type load cells

General Sensor-GSB interchangeable with 65023 and RTI 5123. 3 mv/v, 0.03% nonlinearity, 350/350 ohm, 20ft 4 cond. cable, nickel plated steel. NTEP 98-033 (1,000 lb- 10,000 lb).


Diamond Series DSB The most economical beam type load cell, Low cost 3 mv/v None NTEP load cell.


Sensortronics Model 65083H Hermetically Sealed  Stainless steel cell that is physically but not electrically (2 mv/v rather than 3mv/v) interchangeable with Sensortronics 65023 and RTI 5123/9123. Includes a glass thru metal seal at cable entry for true hermetic sealing. NTEP 950058 MIII 5,000 divisions. Capacities: 1K, 1.5K, 2.5K, 4K, 5K, 10K lbs.


Sensortronics Model 65083 2mv/v Stainless Steel  Welded seal stainless steel cell that is physically but not electrically (2 mv/v rather than 3mv/v) interchangeable with Sensortronics 65023 and RTI 5123/9123. NTEP 950058 MIII 5,000 divisions. Capacities: 1K, 1.5K, 2.5K, 4K, 5K, 10K lbs.


Sensortronics Model 65083 3mv/v Stainless Steel   Welded seal stainless steel cell that is physically and electronically interchangeable with Sensortronics 65023 and RTI 5123/9123. NTEP 950058 MIII 5,000 divisions. Capacities: 1K, 1.5K, 2.5K, 4K, 5K, 10K lbs.


HBM Inc. Model BBS (same as BBS1, BBS2, BBS2F). Interchangeable with BLH Model LBG1. The boot is filled with an insulating grease. Factory Mutual approved. 2mv/v, 0.3% nonlinearity, 810/750 ohms (50-1K0, 375/350 ohms (2.5K - 7.5K), 10 ft 4 cond cable, nickel plated steel. NTEP 87-087 S/M III 3,000 div. Capacities: 50, 100, 200, 250, 500, 1K, 2K lbs.


HBM Inc. Model BLC
Matched outputs. Nameplate on cell shows 1.5 mv/v at half capacity. 3mv/v, 0.02% nonlinearity, 1000/1000 ohm, 17-4 stainless steel. 10 ft 4 cond cable - 500 lb, 1k, 2.5K, 4K; 20 ft 4 cond cable 5K, 10K. FM approved NTEP 88-278 M III 5,000 div & S III 3,000 div. Capacities: 250, 500, 1K, 2.5K, 4K, 5K, 10K lbs


Nikkei Model NSB
Interchangeable with Sensortronics 65023 and RTI 5123. 3 mv/v, 0.03% nonlinearity, 350/350 ohm, 20 ft 4 conductors cable, nickel plated steel. NTEP 93-123 S III/IIIL 3,000 div & M III 5,000 dvi & M IIIL 10,000 div. Capacities: 250, 500, 1K, 1.5K, 2K, 2.5K, 4K, 5K, 10K, 15K, 20K


Nikkei Model NSB-SS
Interchangeable with Sensortronics 65023-SS and RTI 9123.  3 mv/v, 0.03% nonlinearity, 350/350 ohm, 20 ft 4 conductors cable, stainless steel. NTEP 94-019 S III/IIIL 3,000 div & M III 5,000 dvi & M IIIL 10,000 div (1K - 10K lb). Capacities: 250, 500, 1K, 1.5K, 2K, 2.5K, 4K, 5K, 10K, 15K, 20K


HBM Inc. Model SB3
2 mv/v, 0.03% nonlinearity, 385/350 ohms, 4 cond cable length below, nickel plated steel.
Capacities: 1K, 2K, 5K, 10K, 20K, 50K, 100K lbs


Totalcomp Model TB2 & TB3
I
nterchangeable with Toledo ® beam load cells for 1985/2095/2155/2885 platforms. 2mv/v, 0.02% nonlinearity, 440/450 ohm, 15 ft 4 cond. cable, stainless steel.
Capacities: 100, 200, 250, 300, 500, 1000, 2000 lbs.


Sensortronics 60040
Low profile bending beam load cell. Factory Mutual System approved.
Capacities: 25, 50, 75, 100, 150, 250, 500 lb.


Totalcomp Model TB41
Interchangeable with Sensortronics Model 600040. Exclusive heavy duty construction eliminates the rubber boot. This cell is throughly potted and has a protective metal shield over the strain gage area.
Capacities: 25, 50, 75, 100, 150, 250, 500 lbs.


Totalcomp Model TB745
Hermetically sealed stainless steel cell that is interchangealbe with Toledo beam load cells for 745 mount. 2mv/v, 0.02% nonlinearity, 350/350 ohm, 20 ft 4 cond cable, stainless steel. Capacities: 1K, 1.25K, 2.5K, 4K, 5K, 10K, 20K lbs.


Totalcomp Model TSB
Interchangeable with Sensortronics 65023, RTI 5123, and Nikkei NSB. 3 mv/v, 0.03% nonlinearity, 350/350 ohm, 20 ft 4 conductors cable, nickel plated steel. NTEP 93-123 S III/IIIL 3,000 div & M III 5,000 dvi & M IIIL 10,000 div (1K - 10K).
Capacities: 250, 500, 1K, 1.5K, 2K, 2.5K, 4K, 5K, 10K, 15K, 20K


Totalcomp Model TSB-SS
Interchangeable with Sensortronics 65023-SS, RTI 9123, and Nikkei NSB-SS. 3 mv/v, 0.03% nonlinearity, 350/350 ohm, 20 ft 4 conductors cable, stainless steel. NTEP 94-019 S III/IIIL 3,000 div & M III 5,000 dvi & M IIIL 10,000 div (1K - 10K lb). Capacities: 250, 500, 1K, 1.5K, 2K, 2.5K, 4K, 5K, 10K, 15K, 20K


Revere Transducer Inc. Model 5123 and 9123
Interchangeable with Sensortronics Model 65023. 3mv/v, 0.03% nonlinearity, 350/350 ohm, 20 ft 4 conduit cable, nickel plated.


Revere 5103 Is a double-ended, center-loaded shear beam. Its high accuracy, low profile, tolerance to non-axial loading and redundant seal make it a very good choice for tank, track and pitiless truck scales in wet, corrosive environments.


Revere Transducer Inc. Model SSB
Hermetically sealed. Interchangeable with HBM Model SB3 and Nikkei NSSB. 2 mv/v, 0.03% nonlinearity, 350/350 ohm, 15 ft 4 cond cable, stainless steel. NTEP 86-041 S/M III 3,000 div.


Totalcomp Model THB35
Hermetically Sealed Stainless Steel cell that is interchangeable with Sensortronics Model 65023 and RTI Models 5123/9123. 3mv/v, 0.03% combined error, 350/350 ohm, 20 ft 4 cond cable.


Tedea-Huntleigh Model 3510
Hermetically sealed stainless steel cell that is interchangeable with Sensortronics 65023 and RTI 5123/9123. 3mv/v, 0.03% combined error, 380/350 ohm, 5m 6 cond cable, stainless steel. NTEP 96-000 III S 3,000 div & M 5,000 div.


Totalcomp Model TBM4
Interchangeable with Toledo Masstron ML4000 Series with blind load hole.
12.5" long, 2.75" W, 2.75" H, 3.5" mounting hole spacing 6.25" load hole spacing
2 mv/v, 0.03% nonlinearity, 350/350 ohm, 30 ft 4 cond cable, stainless steel


Totalcomp Model TZ6
Interchangeable with HBM Z6, RTI SHB, Tedea DC6, Hermetically sealed to IP68
2 mv/v, 0.03% total error, 380/350 ohms, 3 m 6 cond cable, stainless steel.


Sensortronics Model 60030
Used in Electroscale High Impact LC Scale
3 mv/v, 0.05% nonlinearity, 350/350 ohm, 20 ft 4 cond cable, nickel plated steel


Cardinal SB Beam Load Cell
2mv/v, 0.03% nonlinearity, 380/350 ohm, 20 ft 4 cond cable, stainless steel


CAS BSA Beam Load Cell
3mv/v, 0.03% nonlinearity, 350/350 ohm, 20 ft 6 cond cable, nickel plated steel

 


Sensortronics Model 65023
Interchangeable with RTI 5123, Totalcomp TSB, Nikkei NSB. 3 mv/v, 0.03% nonlinearity, 350/350 ohms, 20 ft 4 cond cable, nickel plated steel. NTEP 86-044 S/M III 5,000 div 1K thru 10K.
Capacities: 250, 500, 1K, 2K, 2.5K, 3K, 4K, 5K, 10K, 15K, 20K lbs.


Sensortronics Model 65023-SS
Interchangeable with RTI 9123, Totalcomp TSB-SS, Nikkei NSB-SS. 3mv/v, 0.03% nonlinearity, 350/350 ohm, 20 ft 4 cond cable, stainless steel. NTEP 88-298A1 S/M III 5,000 div 1K thru 10K.
Capacities: 250, 500, 1K, 2K, 2.5K, 4K, 5K, 10K, 15K, 20K lb


   

Copyright ©2003 loadcells4u.com

Best Digital Lab Scales | Best Digital Scales | Digital Analytical Balance | Analytical Weighing Scales | Digital Commercial Bench Scale | Digital Counting Scales | Digital Crane Scales | Digital Floor Scales | Digital Food Scales | Digital Gram Scales | Digital Gram Pocket Scale | Digital Counting Balance | Digital Hanging Scales | Digital Industrial Scales | Digital Label Printing Scale | Digital Parcel Scale | Digital Pocket Scales | Digital Postal Scale | Digital Precision Scale | Digital Price Computing Scale | Digital Retail Weighing Scale | Digital Shipping Scale | Digital Warehouse Scales | Digital Weighing Balance | Digital Weighing Scales | Electronic Postal Scale | Electronic Scales | Industrial Counting Scales | Industrial Platform Scales | Platform Bench Scales | Wheel Load Weighers  | Industrial Crane Scales | Food Retail scales | Wheel Weighing Scales | Warehouse Crane Scales | Best load cells | Tank mounts with load cells | Canister type load cells | S type load cells | Beam type load cells | Single point load cells